找回密码
 立即注册
  • 发信息
  • 回复
  • 收藏

模拟均衡 Schaack Audio Technology AnalogQ v1.0.8 PC

ajin 2021-1-17 09:47 131人围观 EQ/均衡类

系统要求:PC
软件格式:VST x64
大小:  4.99 MB
时间:2021年1月16日


像模拟一样均衡
AnalogQ允许您以模拟方式均衡材料。尽管许多可用的均衡器插件都在Nyquist(半采样率)附近遇到问题,例如EQ形状失真,但AnalogQ能够产生高达Nyquist的类似模拟的频率响应,同时甚至允许EQ中心频率高达30kHz,所有没有过度采样!附加的自然相位模式以非常低的延迟(1ms)产生了接近完美的幅度/相位响应。

特征
接近奈奎斯特(Nyquist)时没有传统问题的均衡器,无需过度采样即可实现,非常紧密地遵循模拟域模型提供频率响应
低延迟的“自然相位”模式在准理想的幅度响应之外还增加了准理想的相位响应
基于Pultec EQP-1A原理图的仿真,采用Pultec样式的Boost / Cut Low Shelf
均衡器频率最高可调节至30kHz(Pultec式低架除外)
集成的高反应性,可定制的频谱分析仪,带有双频谱显示,用于输入和输出
无缝调整大小的界面
低CPU使用率(在半体面的系统上通常少于1%)
高质量64位浮点数处理

Equalize like it's analog
AnalogQ allows you to equalize your material the analog way. While many available equalizer plugins suffer from having problems near Nyquist (half sample rate), such as distortion of the EQ shapes, AnalogQ is capable of generating an analog-like frequency response up to Nyquist while even allowing EQ center frequencies up to 30kHz, all without oversampling! The additional Natural Phase mode generates a near-perfect magnitude/phase response at the expense of very low (1ms) latency.

Features
EQ without conventional problems when approaching Nyquist, realized without oversampling, offering a frequency response following the analog domain model very closely
Low-latency 'Natural Phase' mode adds quasi perfect phase response additionally to quasi perfect magnitude response
Pultec-style Boost/Cut Low Shelf, based on simulation of Pultec EQP-1A schematic
EQ frequencies can be adjusted up to 30kHz (except for Pultec-style Low Shelf)
Integrated highly reactive, customizable Spectrum Analyzer with dual spectrum display for input & output
Seamlessly resizeable interface
Low CPU Usage (typically less than 1% on half-decent systems)
High quality 64Bit floating point numbers processing

home.php?mod=space&uid=1&do=blog&id=3281

鲜花

握手

雷人

路过

鸡蛋
我有话说......