瞬态效果器 Audio Assault - Transient Shaper 1.1 PC/MAC

2020-4-24 08:47| 发布者: ajin| 查看: 265| 评论: 0|原作者: ajin

系统要求：PC/MAC

软件格式：

厂家：audio-assault.com/products/transient

大小：PC,38.14MB; MAC,47.8MB

时间：2017年12月10日

*Register your e-mail to receive updates and support.

Tighten up a tubby kick drum, remove unwanted room tone, emphasize the decay of your toms, transform guitar DI’s, add brilliance to a vocal, and so much more!

Attack
The Attack parameter controls the strength of the detected transients.
A high attack will increase the perceived attack of an instrument, giving the impression of a high velocity note being played.
A low attack will give the opposite effect.

Sustain
The Sustain parameter controls the strength of the detected sustained signal post-transient.
A high sustain will increase the amplitude of the sustain portion of the signal, allowing you to increase the decay of the source.
A low sustain will give the opposite effect.

2X
The 2X control doubles the effect of the respective Attack and Sustain controls.

Clip
Activates a clipper on the output of each respective section, which gives the output of Multi Transient a hard digital ceiling. This can be used to control the strength of the transients when the 2X switch is activated by clipping the transient if it gets too hot. For exaggerated clipped effects, push into the clipper using the Output control.

Output
Dials in the right amount of output gain using a linear output circuit.

Phase
Inverts the polarity of the plugin’s output.

Bypass
Brings Multi Transient in and out of bypass.

Mix
Blends between the completely dry signal and the output of the channel’s transient detection and shaping circuit. Allows you to find just the right overall blend of the shaped signal, or to create more subtle parallel transient shaping effects.

Compatibility
Transient is available in VST/VST3/RTAS/AAX and AU* on Mac & Windows in both 32 & 64 bit versions.
*AU is only available on Mac.

*注册您的电子邮件接收更新和支持。

收紧桶底鼓，删除不必要的房间音调，强调你的鼓的衰变，改变吉他DI，为声乐增添光彩，还有更多！

攻击
Attack参数控制检测到的瞬态的强度。
高攻击会增加乐器的感知攻击，给人以高速音符的印象。
低攻击会带来相反的效果。

支持
Sustain参数控制检测到的持续信号后瞬变的强度。
高维持将增加信号的维持部分的幅度，允许您增加信号源的衰减。
低维持会产生相反的效果。

2X
2X控件将各自的Attack和Sustain控件的效果加倍。

夹
在每个相应部分的输出上激活一个剪辑器，使得Multi Transient的输出成为一个硬数字天花板。这可以用来控制瞬态的强度，当2X开关被激活时，如果过热，它会被截断。对于夸张的剪辑效果，使用输出控件推入剪辑器。

产量
使用线性输出电路拨打正确的输出增益量。

相
反转插件输出的极性。

旁路
带来多瞬变进出旁路。

混合
在完全干燥的信号和通道的瞬态检测和整形电路的输出之间混合。允许您找到正确的整形信号的整体混合，或创建更细微的并行瞬态成形效果。

兼容性
Mac和Windows上的VST / VST3 / RTAS / AAX和AU *在32位和64位版本中都提供了Transient。
* AU只能在Mac上使用。

home.php?mod=space&uid=1&do=blog&id=767