合成器 SoloStuff SoloRack v1.31 Incl.Keygen R2R PC

2020-4-22 11:27| 发布者: ajin| 查看: 285| 评论: 0|原作者: ajin

系统要求：PC

软件格式：WiN32/64 - VST

厂家：http://www.solostuff.net/solorack/

大小：3.7 mb

时间：2018年9月27日

SoloRack is a modular synthesizer that mimics the usability and functionality of hardware Eurorack modular systems. Whether you are an experienced Eurorack user or strictly a software user you will most probably find something new within almost all modules available. A large variety of modules are available, designed with attention to detail. Keeping familiarity and similarity to Eurorack intact for ease of use and seamless integration into Eurorack systems if desired.

Download SoloRack v1.31

Disclaimer

NONE of the currently available SoloStuff modules are emulations of other hardware manufacturers modules. Please DO NOT assume that these are emulations.

Main Features include:

Practically no limit to the number of modules and rack rows that can be added.
The System B currently comes with a variety of modules. Including Oscillator modules, filters, Amplifiers, Mixers, panner, ADSR, VCLFO, Random-Sample and Hold, Noise module, Delay module, Chorus module, Reverb Module, Ring Modulators, CV sequencer, Trigger sequencer and many more utilities like Input/Ouput modules, MIDI to CV, tempo from DAW, clock divider, logic Tool, switch and CV tools..
Can work as an effect with multiple inputs and outputs.
Both 14bit and 7bit MIDI is supported. (currently using LSB/MSB).
Polyphony is possible using manual patching as it is done in hardware. Or through the sequencer modules.
Multichannel MIDI support. Can be used to achieve multi-timbral voices.
MIDI patch points and MIDI cables routing between modules all working at audio rate!!
Support for Bi-directional patch points that can work as both inputs or outputs at the same time. As in some Eurorack modules, like switches for example.
Offers a ridiculous amount of oversampling (up to X256). This is NOT a zero stuffing or interpolation method. This is an actual increase of the internal sampling rate inside the synth. Which means that it can process ultra sonic audio. I provide such features for people who are particular about quality, Not that any current CPU can handle it!!.
Audio rate modulation of any CV input. The system even allows ultra sonic modulation when oversampling.
Minimum internal sample block size (1 sample), this gives minimum possible delay between modules.
Engineered from ground up to be CPU efficient. With optimization done at each level or development, not just at the end.
Connectivity to modular hardware is supported (including but not limited to Eurorack). With 10 Audio/CV inputs, 12 Audio/CV outputs. (Note: For low frequency CV you will need an interface that has DC coupled inputs/outputs. Or use dedicated modules like the Expert Sleepers(TM) ES-6 and ES-3.
Currently 220 presets are available (PLUS extra variations).
More modules are expected to be added. Some of them may be included as part of the System B, others will be sold separately.
More information about the modules can be found in shop page.

Known bugs and issues

In Bitwig, The Reset function of the SA03 (MIDI to CV) module does NOT go to high voltage when you press STOP in Bitwig. This is because bitwig seemingly doesn’t behave like other DAWs in the sense that it will not TELL the plugin when it goes to zero position.
Some DAWs like cubase can’t allow a synth to act as an effect. For those, you have to also download the FX version (if you like to use SoloRack as an effect). First install SoloRack above, then place the FX version files in the folder where you installed SoloRack. This will be automated in the next release.

SoloRack是一个模块化的合成器，模仿硬件EuroRACK模块化系统的可用性和功能性。不管你是一个有经验的Eurorack用户还是严格意义上的软件用户，你几乎在所有可用的模块中都会发现一些新的东西。大量的模块是可利用的，设计注重细节。保持熟悉和相似的EuroRACK完整，便于使用和无缝集成到EuroRACK系统，如果需要的话。

Download SoloRack V1.31

免责声明

目前可用的SOLooStudio模块中没有一个是其他硬件制造商模块的仿真。请不要认为这些都是仿真。

主要特点包括：

实际上没有限制可以添加的模块和机架行的数量。
系统B目前有各种各样的模块。包括振荡器模块、滤波器、放大器、混频器、摇摄器、ADSR、VCLFO、随机采样保持、噪声模块、延迟模块、合唱模块、混响模块、环形调制器、CV定序器、触发器定序器和许多其他实用程序，如输入/输出模块、MIDI到CV、DAW的节奏、时钟分割DER，逻辑工具，开关和CV工具。
可以起到多输入多输出的作用。
支持14-位和7位MIDI。（目前使用LSB/MSB）。
复调是可能的，使用手工修补，因为它是在硬件。或者通过定序器模块。
多通道MIDI支持。可以用来实现多音色的声音。
MIDI修补点和MIDI电缆在模块之间路由，所有工作在音频速率！！
支持双向补丁点，可以同时作为输入或输出。例如在一些EuroRACK模块中，例如开关。
提供了一个荒谬的过采样量（到X256）。这不是一个零填充或内插方法。这是合成器内部采样速率的实际增加。这意味着它可以处理超音速音频。我为那些特别注重质量的人提供这样的特性，而不是任何当前的CPU都能处理它。！
任何CV输入的音频速率调制。当过采样时，该系统甚至允许超声波调制。
最小内部采样块大小（1个采样），这使得模块之间的最小可能延迟。
从地面工程到CPU效率。在每个级别或开发中进行优化，而不仅仅是在最后。
支持模块化硬件的连接（包括但不限于EURORACK）。带有10个音频/CV输入，12个音频/CV输出。（注意：对于低频CV，您需要一个具有直流耦合输入/输出的接口。或者使用专门的模块，如专家睡眠器（TM）ES-6和ES-3。
目前有220个预置可用（加上额外的变化）。
预计将增加更多的模块。其中一些可以作为系统B的一部分被包括，其他将被单独出售。
有关模块的更多信息可以在商店页面中找到。

已知错误和问题

在Bitwig，当在Bitwig按下停止时，SA03（MIDI至CV）模块的复位功能不会达到高电压。这是因为bitwig看起来不像其他DAW，也就是说，当它到达零位置时，它不会通知插件。
一些类似于CuBASE的DAWS不能允许合成器起作用。对于这些，你还必须下载FX版本（如果你喜欢使用SoloRack作为一个效果）。首先安装SOLROACK，然后将FX版本文件放在安装SoloRack的文件夹中。这将在下一个版本中自动化。

home.php?mod=space&uid=1&do=blog&id=692