PI is an innovative, multi-channel phase interactions mixer plug-in engine for Mac and PC. Good phase relationships are key to a great sounding mix. When tracks are summed into a stereo mix bus, instruments tend to overlap and interact with each other across the frequency range and phase position. A bass track could be temporarily out of phase with the kick or rhythm guitar tracks, and when summed together the two instruments would cancel each other out over the overlapping frequency range, causing a temporary "hole" in the low end. Similarly, a snare track could end up sounding thin in a mix when the toms' resonance is out of phase with the snare. Enter PI. Designed to enhance any mix, PI dynamically rotates the phase of the individual mixer channels to achieve maximum phase correlation within the mix. PI minimizes negative interaction and significantly improves the overall sound of the mix. Just drop PI into the last insert slot of each of your DAW mixer channels and listen. WHY PI PI works to improve the summing of your favorite Digital Audio Workstation. PI minimizes overlapping frequency cancellations between instruments within the mix, improves mono compatibility, and brings back the depth and focus lost when out-of-phase frequencies in the mix cancel each other out. DYNAMIC PHASE ROTATION Instruments with similar frequency content, such as bass and bass-drum, can be temporarily out of phase and cancel each other's fundamental frequencies. The resulting sound is often described as "thin" and "hollow". Because those interactions happen randomly across varying frequencies and to different degrees, this effect cannot be remedied using a simple, fixed phase-rotator or equalizer. PI constantly analyzes the phase correlation of each track and dynamically adjusts their respective phases to achieve optimal correlation and maintain the full depth and timbre of the instruments in the arrangement. TRUE MULTI-TRACK AWARENESS PI utilizes a unique central background processor to sample-accurately analyze and process the phase position of each track to achieve the optimal phase relationships in your mix in real-time. 相位相互作用混频器 PI是一种创新的多通道相位交互混频器插件引擎,适用于Mac和PC。 良好的相位关系是一个伟大的声音组合的关键。当轨道被汇总成立体声混合总线时,仪器在频率范围和相位上往往会重叠并相互作用。低音音轨可能会暂时与踢腿或节奏吉他音轨不同步,当两种乐器加起来时,会在重叠的频率范围内相互抵消,在低端造成一个临时的“洞”。同样,当汤姆斯的共振与陷阱的共振不同步时,陷阱轨道可能会变得很薄。 输入PI。 为了增强任何混音效果,PI动态旋转各个混音器通道的相位,以在混音中实现最大的相位相关性。pi最大限度地减少了负面的交互作用,并显著地改善了整体的混音效果。只需将pi放到每个DAW混音器频道的最后一个插入槽中,然后聆听。 为什么PI PI可以改善您最喜欢的数字音频工作站的总和。pi最大限度地减少混音中仪器之间的重叠频率抵消,提高单声道兼容性,并在混音中的异相频率相互抵消时恢复深度和焦点丢失。 动态相位旋转 具有相似频率内容的乐器,如低音和低音鼓,可以暂时失相,相互抵消基频。产生的声音通常被描述为“薄”和“空”。由于这些相互作用在不同频率和不同程度上随机发生,因此不能使用简单的固定相旋转器或均衡器来补救这种影响。 PI不断地分析每个轨道的相位相关性,并动态调整各自的相位,以实现最佳相关性,并在排列中保持仪器的完整深度和音色。 真正的多轨意识 PI利用一个独特的中央背景处理器对每个轨道的相位位置进行精确的采样分析和处理,以实时实现混合中的最佳相位关系。 |