E知音 首页 软效果 其他效果 查看内容

音频恢复和降噪套件 Acon Digital Restoration Suite 2 v2.1.2 PC MAC

2021-6-30 16:56| 发布者: ajin| 查看: 574| 评论: 0

系统要求:PC/MAC
软件格式:VST, VST3, AAX, AU WIN.OSX x86 x64
大小:112.8 MB
时间:2021年6月30日

Restoration Suite 2 — 音频质量的巨大飞跃
Restoration Suite 2是一套包含四个用于音频恢复和降噪的尖端插件:

DeNoise 2是一个插件,旨在减少噪音,如嘶嘶声、风噪声、嗡嗡声和相机噪音。可以在自适应模式下或在噪声剖面模式下测量噪声特性后自动降低噪声。版本 2 中的新增功能是动态噪声配置文件,可捕获噪声的动态特性,以便可以有效降低随时间波动的噪声,例如风噪声。新算法也得到了极大的改进,现在更不容易出现典型的去噪伪影。
DeHum 2针对通常由接地不良的电气设备引起的嗡嗡声和嗡嗡声,以及其他音调噪声源,如电机噪声。嗡嗡声检测算法在第 2 版中得到了改进,现在有一个新的扫描按钮,可以自动微调基本嗡嗡声频率。
DeClick 2旨在消除脉冲噪声,例如咔嗒声、噼啪声和砰砰声。这些失真在 LP 和 78 RPM 唱片中经常遇到,但在数字录音中也会由于数据包丢失或失真而发生。DeClick 2 的重击降低功能也可以有效地处理带有不需要的爆破音的人声录音。该算法在第 2 版中得到了改进,现在不太可能减少有用信号中的攻击和瞬变。
DeClip 2使用改进的算法恢复由模拟或数字剪辑失真的录音。
版本 2 中的新功能
与版本 1 相比,所有四个插件在处理算法和用户界面方面都得到了重大改进。DeNoise 2引入了新颖的动态噪声配置文件,有助于减少随时间随机变化的噪声,例如风噪声或领夹式麦克风的沙沙声. 早期版本仅捕获具有时间恒定噪声水平的静态噪声打印,而动态噪声配置文件则从要降低的噪声中捕获统计数据。然后,噪声抑制算法使用测得的统计数据为有噪声的输入信号估计最合适的噪声阈值曲线。

DeNoise 2、DeClick 2和DeHum 2现在支持 Mid/Side (M/S) 处理,这可以减少立体声图像中不需要的波动。DeClick 2 中的核心算法得到了重大改进,现在可以更好地保留瞬态,并且可以在不引入伪影的情况下将其推到更高的点击和噼啪声灵敏度。

DeHum 2 有一个新的自动微调按钮,可以触发嗡嗡声频率的自动估计。嗡嗡声跟踪和抑制也得到了改进。DeClip 2在音频质量方面得到了改进,现在提供了更令人印象深刻的剪辑信号峰值重建。该套件中的所有插件现在都支持高达 7.1.6 声道的环绕声和沉浸式音频格式。

Acon Digital Restoration Suite 2 可用作 Windows 和 Mac 的 VST、VST3 或 AAX,或用作 Mac 的 AU 插件。Windows 有 32 位和 64 位版本。Mac 版本为 64 位,可在 ARM(例如Apple M1)和 Intel 处理器上本地运行。
Acon æ•°å-—恢复套件 |  éŸ3频恢复和降å™a插件
Restoration Suite 2 — a Giant Leap in Audio Quality
Restoration Suite 2 is a suite of four cutting edge plug-ins for audio restoration and noise reduction:

DeNoise 2 is a plug-in designed to reduce noise such as hiss, wind noise, buzz and camera noise. The noise can be reduced automatically in the adaptive mode or after measuring the characteristics of the noise in the noise profile mode. New in version 2 are dynamic noise profiles that capture the dynamic properties of the noise so that noise that fluctuates over time, such as wind noise, can be effectively reduced. The new algorithm has also been greatly improved and is now even less prone to typical de-noising artifacts.
DeHum 2 targets hum and buzz typically introduced by poorly grounded electrical equipment, but also other tonal noise sources like electrical motor noise. The hum detection algorithm has been improved in version 2 and there’s now a new Scan button that automatically fine tunes the fundamental hum frequency.
DeClick 2 is designed to remove impulsive noise such as clicks, crackle and thumps. These distortions are frequently encountered on LP and 78 RPM records, but also occur in digital recordings due to drop-outs or distorted data packets. DeClick 2’s thump reduction works also effectively on vocal recordings with unwanted plosives. The algorithm has been improved in version 2 and is now less prone to reducing attacks and transients in the wanted signal.
DeClip 2 restores audio recordings distorted by analog or digital clipping with an improved algorithm.
New in Version 2
All four plug-ins have received major improvements both in the processing algorithms and the user interface compared to version 1. DeNoise 2 introduces the novel dynamic noise profiles that help reducing noise that varies randomly over time, such as wind noise or rustle from lavalier microphones. Where the earlier versions merely captured a static noise print with time-constant noise levels, the dynamic noise profiles capture statistics from the noise to be reduced. The noise suppression algorithm then estimates the most suitable noise threshold curve for the noisy input signal using the measured statistics.

DeNoise 2, DeClick 2 and DeHum 2 now support Mid/Side (M/S) processing, which can reduce unwanted fluctuations in the stereo image. The core algorithm in DeClick 2 received major improvements and now better preserves transients and can be pushed to higher click and crackle sensitivities without introducing artifacts.

DeHum 2 has a new automatic fine-tune button that triggers automatic estimation of the hum noise frequency. The hum tracking and suppression have also been improved. DeClip 2 was improved in terms of audio quality and now offers even more impressive reconstruction of clipped signal peaks. All the plug-ins in the suite now support surround and immersive audio formats up to 7.1.6 channels.

Acon Digital Restoration Suite 2 is available as VST, VST3 or AAX for both Windows and Mac or as AU plug-ins for Mac. There are 32 and 64 bit versions for Windows. The Mac version is 64 bit and runs natively on both ARM (such as Apple M1) and Intel processors.

home.php?mod=space&uid=1&do=blog&id=3628

路过

雷人

握手

鲜花

鸡蛋
我有话说......
栏目热门
纯CSS实现图片高亮显示
  • 温暖和闪烁效果 SoundSpot Ravage v1.0.2 P
  • 经典激励器 BBE Sound Sonic Sweet v4.6.1
  • 油腻香肠音频处理 Dada Life Sausage Fatte
  • 音频增强修复/语音转换Accusonus ERA 6 Bun
  • 音频处理 Sugar Bytes Effectrix v1.4.8 PC
  • 音频处理 Puremagnetik Eidolon v1.0.1 WiN
  • 磁带骤停音效 StudioLinked Tape Stop v1.0
  • 音频修复抛光 iZotope RX 10 Audio Editor
  • 钢铁音乐之声效果 Kazrog True Iron v1.4.2
  • 低音强化插件 Aurora DSP Mammoth v1.5.0 P
  • 虚拟磁带机效果 Slate Digital Virtual Tap
  • 色彩效果器 XLN Audio RC-20 Retro Color v