E知音 首页 软效果 综合效果包 查看内容

母带效果套件 Initial Audio Master Suite v1.0.0 PC MAC

2020-9-24 15:01| 发布者: ajin| 查看: 285| 评论: 0|原作者: ajin

系统要求:PC/MAC
软件格式:VST/VST3/AU x86 x64 (WIN/OSX)
大小:120 mb
时间:2019年6月6日

Mastering Plugin Features

THD: Total Harmonic Distortion, this can ‘fatten’ up the master and help increase the perceived loudness.
Loudness: Increase or decrease the loudness of your master in decibels. Uses an intelligent compression and limiting algorithm to ensure maximum loudness with minimal distortion.
LUFS Meter: The LUFS meter ( Loudness Units relative to Full Scale) is an industry standard representation of perceived loudness. The meter goes green when in the ‘sweet’ zone of a loud master without over compressing the dynamics of your mix.
Soften: This softens the compression curve, also known as a ‘soft knee’.
Mix: Mix the compressed audio with the original. If you are pushing the loudness hard and the master is sounding over compressed with a loss of dynamics, this control can help restore some dynamics while still keeping the master loud.
Analog: Changes the frequency response of master suite to sound more Analog.
3 Band Equalizer: Cut or boost the low, mid and high frequencies by up to 6dB.
Stereo Image: The Mono control works by making the audio completely mono below the set frequency. This can help to tighten up the low end and ensure it is coming only from the center of the stereo field. The Stereo control enhances the stereo field for the frequencies only above the mid range, leaving the lower frequencies untouched. This can be used to add extra ‘space’ in the master by pushing instruments even wider in the stereo field.
Ceiling: Sets the maximum loudness for peaks. Your master will not go louder than this.

掌握插件功能

THD: 总谐波失真, 这可以 ' 肥化 ' 大师, 并有助于增加感知的响度。
响度: 增加或减少你的主人在分贝的响度。使用智能压缩和限制算法, 以确保最大的响度和最小的失真。
LUFS 仪表: LUFS 仪表 (相对于全刻度的响度单位) 是感知响度的行业标准表示。当在一个响亮的主人的 "甜蜜" 区域, 而不超过压缩你的混合的动态, 米变成绿色。
软化: 这软化了压缩曲线, 也被称为 "软膝盖"。
混合: 将压缩的音频与原始音频混合。如果你是推动响度硬和主的冠冕堂皇压缩与动态的损失, 这种控制可以帮助恢复一些动态, 同时仍然保持主机大声。
模拟: 将主套件的频率响应更改为声音模拟。
3波段均衡器: 将低频、中频和高频削减或提升高达6dB。
立体声图像: 单声道控件的工作原理是使音频完全在设置的频率以下。这可以帮助收紧低端, 并确保它只来自立体声场的中心。立体声控制仅在中距离以上增强频率的立体声场, 使较低的频率保持不变。这可以用来添加额外的 ' 空间 ' 在主通过推动仪器更广泛的立体声领域。
天花板: 设置峰值的最大响度。你的主人不会比这更大声。



路过

雷人

握手

鲜花

鸡蛋
我有话说......
栏目热门
纯CSS实现图片高亮显示
  • 效果包完整版 Plugin Alliance Complete 3.
  • 恐龙混音和母带处理 IK Multimedia T-RackS
  • 经典效果音源包 Waves Complete 14 v2023.1
  • 经典效果音源包 Waves Complete 11 v2020.0
  • 黑公鸡套装 Black Rooster Audio The All B
  • 效果包 Fuse Audio Labs bundle 2019.11.CE
  • 插件包 MeldaProduction MCompleteBundle v
  • 臭氧母带套件高级版 iZotope Ozone 9 Advan
  • 经典效果音源包 Waves Complete v13 16.05.
  • 经典效果音源包 Waves Complete 12 v2021.0
  • 中子智能混音套件 iZotope Neutron v4.6.0
  • 效果包 Kilohearts Toolbox Ultimate & Sla