管弦狂想曲 Impact Soundworks Rhapsody Orchestral Colors

Impact Soundworks Rhapsody Orchestral Colors | KONTAKT | 6.79 GB
一个多合一的交响曲库，比以往更轻松地将您的管弦乐思想变为现实！拥有30,000多种弦乐，铜管乐器，风和合奏合奏的详细样本，以及独特的和弦与音色库，使您可以轻松触及整个交响板。使用Rhapsody管弦乐色彩，没有更快的方法来创建清晰的管弦乐纹理！

狂想曲管弦乐色彩–特点：
30,000多个管弦乐队样本
琴弦：小提琴/提琴，大提琴，贝斯
黄铜：小号，长号，角，大号
风：单簧管/双簧管/长笛，低音管/低音提琴
合唱团：男女合奏+ FX
一键即时和弦发声
每个合奏中两个八度的统一样本
三种麦克风位置：关闭，decca，支腿
持续，断音，断音和特努托
完全控制每个合奏

Rhapsody Orchestral Colors是我们广受好评的Rhapsody Orchestral Percussion虚拟乐器的伴侣。在同一个聚焦，中立且用途广泛的大厅中进行记录，该图书馆提供了乐团的其余部分：弦乐，铜管乐器，管乐和合唱团，所有部分都经过深度采样，以实现最大的控制和灵活性。

库的核心是我们的自定义编排引擎，该引擎可以将单个MIDI音符转换为多个乐团中优美的和弦和纹理。与“预烤”管弦乐库不同，Rhapsody Orchestral Colors使您可以分别控制每个部分的音色，例如，小提琴/中提琴，大提琴和贝司都可以演奏独特的和弦，声音和音程。我们还为每个合奏录制了两个八度的统一音符，使您可以从头开始创建自己的和弦！

Rhapsody Orchestral Colors具有高度灵活的声音，可通过三个麦克风位置进行录制，因为它是郁郁葱葱的电影乐谱和史诗般的线索，因此同样适用于室内音乐和古典模型。每个部分都有自己独特的麦克风混音控件和输出路由，因此您可以混合每个管弦乐队合奏来品尝。电影，电视和游戏作曲家会喜欢这个图书馆的多功能性，以及他们的管弦乐思想可以多快地转移到DAW。

我们知道您会喜欢Rhapsody Orchestral Colors的强大功能和灵活性，并且一如既往，我们希望该乐器能够激发和增强您的音乐。请享用！

Rhapsody Orchestral Colors包含一个优雅而强大的脚本引擎，在一个补丁中最多可支持四个合奏。每个合奏都有其自己独特的控件集：麦克风混音，4频段均衡器，声像，Kontakt输出选择和和弦发声。甚至可以为每种乐器加载或卸载麦克风，而不会影响其他乐器！使用Link控件也可以一次更改所有合奏。

我们的自定义协调器脚本是该库的明星。在此屏幕快照中，每个合奏都被设置为“宽音”模式-通过按键盘上的任意键，每个部分将弹奏一个预先发声的和弦，并在所按下的键上建立大声。演奏较低的八度会触发大三重奏，而较高的八度会触发小三重奏。我们还创建了大量其他模式，例如：

高低：在根音上建立预先编排的三重奏
脂肪：超高密度和弦
八度音阶和力量：八度音阶和4/5间隔
Aleatoric 1-3：每次按键最多触发三个随机音符
Int2：执行第三和第五个三重奏而没有根音
音阶度：播放根音符上的第二，第三，第四等等。
间隔：从第二个到第七个执行两个音符间隔

每个部分也可以设置为随机或拆分模式。在“随机”模式下，将从用户选择的池中随机选择使用的声音。作为鼓舞人心的工具，这真是太棒了！拆分模式最多可使用三个音色，具体取决于使用键盘的哪个部分。

除了超强的和弦模式外，我们还包括Unisons音色，每节采样两个八度的单音符。从低音提琴到小提琴/小提琴和小号，整个乐队的范围是C1到C6！ Unisons可以在自然模式（每个乐器仅在其自然可演奏范围内触发）下弹奏，也可以在区域模式下（每个部分可以分配不同的键盘区域）弹奏。
An all-in-one symphonic library that makes it easier than ever to bring your orchestral ideas to life! Features 30,000+ detailed samples of strings, brass, winds, and choral ensembles, along with a unique library of chords & voicings that puts the full palette of symphonic tones at your fingertips. With Rhapsody Orchestral Colors, there’s no faster way to create fully-voiced orchestral textures!

Rhapsody Orchestral Colors – Features:
30,000+ orchestral samples
Strings: Violins/violas, celli, basses
Brass: Trumpets, trombones, horns, tuba
Winds: Clarinet/oboe/flute, bassoon/contrabassoon
Choir: Men’s and women’s ensembles + FX
Instant chord voicings with a single key
Two octaves of unison samples per ensemble
Three mic positions: close, decca, outrigger
Sustain, staccato, staccatissimo & tenuto
Full control over each ensemble

Rhapsody Orchestral Colors is the companion to our critically-acclaimed Rhapsody Orchestral Percussion virtual instrument. Recorded in the same focused, neutral, and highly-versatile hall, this library offers the rest of the orchestra: strings, brass, winds, and choir ensembles, all deep-sampled in sections for maximum control and flexibility.

The heart of the library is our custom orchestrator engine that transforms single MIDI notes into beautiful, lush chords and textures across multiple ensembles. Unlike “pre-baked” orchestral libraries, Rhapsody Orchestral Colors gives you individual control over the voicing of each section – for example, violins/viola, celli, and basses can all play unique chords, voices, and intervals. We’ve also recorded two octaves of unison notes for each ensemble allowing you to create your own chords from scratch!

The highly flexible sound of Rhapsody Orchestral Colors, recorded with three mic positions, is suited equally to chamber music and classical mockups as it is lush film scores and epic cues. Every section has its own unique mic mix controls and output routing so you can mix each orchestral ensemble to taste. Film, TV, and game composers will love the versatility of this library and how quickly their orchestral ideas can be transferred to the DAW.

We know that you will love the power and flexibility of Rhapsody Orchestral Colors, and as always, we hope this instrument will inspire and enhance your music. Enjoy!

Rhapsody Orchestral Colors includes an elegant and powerful script engine that supports up to four ensembles in a single patch. Each ensemble has its own unique set of controls: mic mix, 4-band EQ, panning, Kontakt output selection, and chord voicing. Mics can even be loaded or unloaded for each instrument without affecting the others! Changing all ensembles at once is also possible with the Link control.

Our custom orchestrator script is the star of the library. In this screenshot, each ensemble is set to “Wide” mode – by pressing any key on the keyboard, each section will play a pre-voiced chord with wide voicing built on the key that was pressed. Playing in the lower octaves will trigger major triads while the upper octaves trigger minor triads. We’ve created a huge number of other modes as well, such as:

Low & High: Pre-orchestrated triads built on the root note
Fat: Super-dense doubled chords
Octaves & Power: Octave unisons and 4th/5th intervals
Aleatoric 1-3: Up to three random notes triggered per key press
Int2: Performs the third and fifth triad without the root note
Scale degrees: Plays the 2nd, 3rd, 4th.. etc built on the root note
Intervals: Performs two note intervals from 2nd to 7th

Each section can also be set to Random or Split modes. In Random mode, the voicing used will be selected at random from a user-selected pool. This is fantastic as an inspirational tool! Split mode allows for up to three voicings to be used depending on what part of the keyboard is used.

Besides the ultra-powerful chord mode, we’ve also included Unisons patches with two octaves of single notes sampled per section. From contrabasses to violins/violas and trumpets, that’s a total orchestra range of C1 to C6! The Unisons can be played in Natural mode, where each instrument triggers only in its natural playable range, or in Zone mode where each section can be assigned a different keyboard region.